Igloohome Deadbolt 2S Installer/User Manual page 32

Tamper Alarm
Intrusion Alarm
Obstruction
Alarm
Emergency
Jumpstart
Decoy PIN Code
Privacy Mode
Quiet Unlock
Volume Control
32
N.A.
N.A.
N.A.
1. Hold the 9V battery against the jumpstart contact points.
2. The lock will sound off a series of beeps and the keypad will light up.
3. Maintaining the same position with the battery and lock's contact points,
enter a valid PIN code, followed by
1. Key in up to 8 random digits before your actual PIN code, followed by
unlock.
1. Hold the multi-function button on your lock for 3 seconds while it is in 'locked'
state i.e. bolt tongue is extended.
To mute audio indicators when unlocking:
1. Tap before entering your PIN code / scanning your RIFD credential / using
your fingerprint.
You will have to perform the same step every time you wish to activate Quiet Unlock.
You will not be able to mute audio indicators if this is performed when the lock is in
'unlocked' state i.e. bolt tongue is retracted.
To configure the volume of your lock:
*Please ensure you are within Bluetooth range of the lock and your Bluetooth func-
tion is turned on.
1. On your igloohome app, tap on
2. Select [Volume].
3. Select the volume level from 0 to 5 (softest to loudest).
4. Tap [Apply].
to unlock.
.
to