Igloohome Deadbolt 2S Installer/User Manual page 24

Pair the lock to your account
3
If you're completely new to igloohome:
Test the lock with the Factory PIN code before you begin the pairing process.
1. Wake the lock up by pressing the touchscreen keypad.
2. Tap , then enter 1234567890, followed by
3. The LED indicator on the lock will flash green when it is successfully unlocked.
You will also hear four ascending tones.
a) Create a property to associate your lock with.
1. Tap on
2. Tap on [Manage Properties].
3. Tap the [+] icon.
4. Input the name and region of the property, and
tap [Submit].
b) Pair the lock to your account.
1. Tap on
2. Tap on the [<] icon.
3. Tap on [Add Lock].
4. Select the property you created.
5. Follow the instructions on the screen.
If you're pairing the lock to an existing igloohome account:
1. Tap on
2. Tap on [Add Lock].
3. Select the property.
4.Follow the instructions on the screen.
24
and select [Add and manage].
and select [Add and manage].
and select [Add and manage].
.