Installation Instructions - Igloohome Push-Pull Mortise Installer/User Manual

Installation Instructions

Determine if your door swings inwards or outwards and adjust the PUSH-PULL setting
on the front and back assemblies accordingly.
Rear of Front Assembly
Cut the key cylinder accordingly for different door thickness.
Door Thickness (mm)
40 - 45
45 - 50
50 - 55
55 - 70
* The notch to snap serves as guideline only and might
change depending on actual door conditions.
10
Rear of Back Assembly
Notch to Snap*
10mm (from the end)
5mm (from the end)
NA
NA
From the outside, if the door swings
OUTWARDS towards you
•
Front Assembly – set to PULL
•
Back Assembly – set to PUSH
Front Assembly
From the outside, if the door swings
INWARDS away from you
•
Front Assembly – set to PUSH
•
Back Assembly – set to PULL
Front Assembly
10mm
5mm
Back Assembly
Back Assembly