Vision REVO User Manual page 86

ID：0
ID
：4
ID：8
ID：12
Figure 10.6-31 DIP dial code
In general, the dial code of the lithium battery system connected to GBMS is 1, and the addresses of
other cabinets are increased successively according to the above table. The system of the last
address should enable can-r / 485-r functions, as shown in the figure below
SHENZHEN CENTER POWER TECH CO., LTD
Address: Rooms 9-12, 7F, Block B, Building 7, Zone 2, Shenzhen Bay Technological and
Ecological Park, Nanshan District, Shenzhen, China
Tel: 0755-66851118 Fax: 0755-66850678 Email: sales@vision-batt.com
ID：1
ID
：5
ID：9
ID：13
Green Our Earth Power Your Vision
The dial-code switch is DIP switch, which is
effective when dialed to ON side, indicating that the
switch is ON, The four ID dial code keys are
independent, for 0/1 binary encoding, 4 ID dial code
a total of 16 encoding definition address.
ID：2
ID：6
ID：10
ID：14
ID：3
ID：7
ID：11
ID：15
86