Communication; Communication With Ups - Vision REVO User Manual

8 Communication

8.1 Communication with UPS

REVO series Li-ion battery system communicates with UPS through the top integrated
GBMS, which transfers all the working status of lithium battery (overcharge, discharge,
over current, short circuit, over temperature, etc.) to UPS. According to the alarm or
protection status of lithium battery system, UPS ensures the safety of the whole working
system. Such communication is through CAN and RS485. RS485 protocol supports the
MODBUS RTU MODBUS/TCP protocol. The communication signals of REVO lithium
battery system are as follows:
Figure 8.1-1 Communication ports
SHENZHEN CENTER POWER TECH CO., LTD
Address: Rooms 9-12, 7F, Block B, Building 7, Zone 2, Shenzhen Bay Technological and
Ecological Park, Nanshan District, Shenzhen, China
Tel: 0755-66851118 Fax: 0755-66850678 Email: sales@vision-batt.com
Green Our Earth Power Your Vision
36