Breaker - Vision REVO User Manual

●
●Red light flashing ●Green light flashing ●yellow light is always on

5.5 Breaker

Each CBMS models are equipped with a circuit breaker to control the DC output terminal
(P+/P-/N). The circuit breaker switch can safely disconnect electrical connections with
UPS.
ON：Normally Close circuit breaker: rotate clockwise to Vertical position.
Off：Normally Open circuit breaker: rotate counterclockwise to Horizontal position.
Figure 5.5-1 MCB ON
There are two ways to turn on CBMS, AC and DC.
No matter which way to start, before turning on the CBMS, you should
close the MCCB, and then press the DC or AC button.
1): Close MCCB (Indicate the MCCB with a number)
2) press DC or AC Button indicate the buttons with a number
SHENZHEN CENTER POWER TECH CO., LTD
Address: Rooms 9-12, 7F, Block B, Building 7, Zone 2, Shenzhen Bay Technological and
Ecological Park, Nanshan District, Shenzhen, China
Tel: 0755-66851118 Fax: 0755-66850678 Email: sales@vision-batt.com
Black out，● red light is always on，●green light is always on
Green Our Earth Power Your Vision
29