Cover/Sheet Insertion - Canon iRC5185 Series Manual

Cover/Sheet Insertion

This mode enables you to set the machine to automatically add front and back
covers, sheet insertions, chapter pages, or tab paper using a different type of paper
from that used for the main documents. In addition, you can decide whether the
front and back covers, and sheet insertions are copied or printed on as well.
IMPORTANT
For information on the modes which cannot be set in combination with this mode, see
2
Chapter 9, "Combination of Functions Chart," in the Copying and Mail Box Guide.
You cannot set the Cover/Sheet Insertion mode when you select multiple jobs.
If you select Staple mode when the optional Finisher-X1 is attached, you cannot staple
more than 20 sheets of A3 paper, or 30 sheets of A4 or A4R paper, including sheet
insertions.
If you select the Staple mode when the optional Finisher-W1 or Saddle Finisher-W2 is
attached, you cannot staple more than 30 sheets of A3 or A4R paper, or 50 sheets of A4
paper, including sheet insertions.
If you are using labels or tracing paper, you cannot print on the front cover, back cover,
or sheet insertions. However, you can print on the inside of the back cover.
NOTE
If you are printing on the front cover, back cover, or sheet insertions, these sheets are
included in the count of the total number of prints made. If these sheets are left blank,
however, the machine's counter does not count them as prints.
Front Cover/Back Cover
This setting adds a front cover and back cover sheet to each set of prints. You may also
print on the front/back cover sheet.
2-42
Printing with Edit Job Ticket
Originals Prints
Printed Front Cover
Printed Back Cover