Canon iRC5185 Series Manual page 14

Workflow Using the Job Ticket
A job ticket is the electronic record of selected printing and finishing characteristics of a
hold job. Using a job ticket in the JDF (Job Definition Format) standard, you can make
sure that every setting is desired before a print job is output. You can check the paper
sizes and types that are registered in the machine, make sample prints, and change the
finishing settings, etc. To change the settings of a job that has an electronic record other
than the JDF, you need to use related applications, such as the printer driver and
imageWARE Prepress Manager.
1
IMPORTANT
You cannot edit the job ticket settings of a job that is submitted from the printer driver.
NOTE
The following two types of job ticket are available:
- Job ticket that applies to the whole job
- Job ticket that only applies to certain pages of a job
iR C5185/iR C4580/iR C4080, iR C5185i/iR C4580i/iR C4080i and Related
Applications
To make the most of the Job Hold function, the iR C5185/iR C4580/iR C4080, iR C5185i/
iR C4580i/iR C4080i is available with the following print-aided applications.
PM Hot Folder
Manager
1-4
Job Hold Function
Imposition and Finishing
imageWARE Prepress Manager
Printer Driver
Print Job with Print Settings
Scan
Print
Finishing
JM Hot Folder Manager
imageWARE Print Job Manager
Print Job with JDF Ticket
Hold
(Print after changing the settings
of the Finishing mode)
Job Management