Canon iRC5185 Series Manual page 58

5
2
6
2-38
Printing with Edit Job Ticket
Select the orientation and the position of the page numbers
press [Next].
Orientation:
[Vertical]: Prints the page number vertically.
[Horizontal]: Prints the page number horizontally.
NOTE
If you set any two of the Page Numbering, Copy Set Numbering, Watermark, or
Print Date modes to print in the same position, a message asking for your
confirmation is displayed when you press
If you press [Reverse Page Num.]:
Select the desired position of the page numbers
If you press [Adjust Position]:
Press [X] or [Y] press [-] or [+] to set their respective position
Enter the page number to start numbering from using
(numeric keys) press [Next].
If you want to insert chapter numbers along with page numbers, specify the
starting chapter number on the left (1 to 9,999), and the starting page number on
the right (1 to 9,999).
If you want to insert the total page number along with page numbers, specify to
have the page numbers start on the left side (1 to 9,999), and the total page
number starts on the right side (1 to 20,000). To set the total page number
automatically, press [Auto].
NOTE
If [Total Page Numbering] is used with the Booklet mode, the total number of pages
are printed automatically.
(Start).
press [Done].
press [OK].
-
0 9