Canon iRC5185 Series Manual page 76

2
2-56
Printing with Edit Job Ticket
To specify the output paper size:
Press [Output Paper Size].
Select the desired paper size
NOTE
To select an A or B series paper size, press [Inch-size].
If you print on nonstandard size paper loaded in the stack bypass, press [Irreg.
Size], enter a value by pressing [X] or [Y], press [OK]
You can also select a size key ([S1] to [S5]), containing a registered paper
size setting, instead of entering values.
NOTE
To recall a paper size from a size key ([S1] to [S5]), it is necessary to register a
paper size in that key beforehand. For instructions on registering a paper size, see
Chapter 4, "Customizing Settings," in the Reference Guide.
If you want to set the paper source:
Press [Paper Select].
If you specify the paper from the paper source, press [Spec. by Paper Source]
select the paper source
press [OK].
press [OK].
[OK].