Canon iRC5185 Series Manual page 61

NOTE
If Copy Set Numbering Option Settings in System Settings (from the Additional
Functions screen) is set to 'On', [Full Surface] and [Numbers in 5 Locations] are
grayed out and cannot be selected. (See Chapter 6, "System Manager Settings," in
the Reference Guide.)
If you set any two of the Page Numbering, Copy Set Numbering, Watermark, or
Print Date modes to print in the same position, a message asking for your
confirmation is displayed when you press
If [Adjust Position] is selected:
Press [X] or [Y]
4
Enter the number to start numbering from
character size, density, and colour
Select the size of the page numbers from [Small], [Medium], and [Large]
('12.0 pt.', '24.0 pt.', and '36.0 pt.').
Adjust the character density by pressing [Light] or [Dark].
You can select [Yellow], [Magenta], [Cyan], [Black], [Red], [Green], or [Blue] for
the specified text.
NOTE
If Copy Set Numbering Option Settings in System Settings (from the Additional
Functions screen) is set to [On], the size of the page numbers becomes [Small]
'10.5 pt.', [Medium] '12.0 pt.', [Large] '14.0 pt.'. (See Chapter 6, "System Manager
Settings," in the Reference Guide.)
5
Press [Done].
press [-] or [+] to set their respective position
(Start).
press [OK].
select the
press [OK].
Printing with Edit Job Ticket
2
2-41