Table of Contents
Advertisement
If you select [Saddle Stitch]:
IMPORTANT
2
You cannot select the stapling position when the optional Finisher-X1 is attached. For
more information on stapling positions, see Chapter 3, "Optional Equipment," in the
Reference Guide.
The accuracy of folds created in the Saddle Stitch mode may vary, depending on the
paper type and the number of sheets.
NOTE
To use the Saddle Stitch mode, the original (stored document) must already be in booklet
form, as shown in the illustration above. (See "Booklet Scanning Mode (Booklet)," on p.
2-47)
If No Finishing Mode Is Set:
If the Collate, Group, and Staple modes are not set, copies are output as follows:
If the Offset Mode Is Set:
The copies are slightly offset vertically in the output tray as follows: (You can also specify
the number of copy sets to offset.)
2-26
Printing with Edit Job Ticket
Originals
Three Copies
of Each Page
Collated in
Page Order
8
1
6
3
Originals
1
2
3
4
Originals
1
2
3
4
Set 1
Set 2
Copies
Copies
Set 3
Advertisement
Table of Contents
