Husqvarna AUTOMOWER 420 Operator's Manual page 31

To set the level of Spiral Cutting
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
Cutting > Use Spiral Cutting > Intensity .
3. Use the left arrow button to select the level of the
Spiral Cutting.
4. Push the BACK button.
4.2.9.4 Slope control
In order to decrease lawn wear near the boundary wire
in slopes, the product prevents to move in the opposite
direction when the product operates in a slope.
control is enabled in the factory settings.
To set the Slope control
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to
move through the menu structure
control > Use Slope control .
3. Push the BACK button.
4.2.9.5 General
General you can change the general settings of the
In
product.
To set the time & date
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Time & Date .
3. Use the number buttons to set the time and then
push the BACK button.
4. Use the number buttons to set the date and then
push the BACK button.
5. Use the arrow buttons to set the time format and
then push the BACK button.
6. Use the arrow buttons to set the date format and
then push the BACK button.
To set the language
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Language.
3. Use the arrow buttons to select language and then
push the BACK button.
To set the Country & Timezone
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
1201 - 007 - 20.02.2023
Settings > Spiral
Slope
Settings > Slope
Settings > General >
Settings > General >
2. Use the arrow buttons and the OK button to move
through the menu structure
Country & Timezone.
3. Use the arrow buttons to select country and then
push the BACK button.
To set the unit format
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Unit format.
3. Use the arrow buttons to select unit format and
then push the BACK button.
To reset all user settings
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Reset all user settings .
3. Use the right arrow button to select
reset of all user settings?
4. Push the OK button to reset all the user settings.
Note:
Security level, PIN code, Loop signal,
Messages, Date & Time, Language and Country
settings are not reset.
The About menu
About menu displays information about the product,
The
for example serial number and firmware versions.
4.2.10 Accessories
Settings for accessories mounted on the product can be
made in this menu.
4.2.10.1 Information
This menu handles accessories mounted on the
product. Contact your local Husqvarna representative for
more information on available accessories.
®
4.2.10.2 Automower Connect
The product can connect to mobile devices that
®
have the Automower Connect app installed. The
®
Automower Connect app has Long-range cellular
connectivity and Short-range Bluetooth
Automower ® Connect app on page 23 .
Refer to
Settings > General >
Settings > General >
Settings > General >
Proceed with
®
connectivity.
Product settings - 31