Husqvarna AUTOMOWER 420 Operator's Manual page 33

4.2.10.5 To avoid collisions with the Automower
The wear on the product and the Automower
decreases when you select
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
house > Avoid collisions with mower .
Note:
Avoid collisions with mower is selected it
If
can result in grass that is not cut around the charging
station.
4.2.10.6 FlexiFence
If you install the FlexiFence accessory, you must enable
the FlexiFence function of the product.
To enable the FlexiFence function
1. Do steps 1–3 in To get access to the menu in the
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
> FlexiFence .
3. Push the OK button to enable
4. Push the BACK button.
1201 - 007 - 20.02.2023
®
house
®
house
Avoid collisions with mower .
Accessories > Mower
Settings > Installation
FlexiFence .
Product settings - 33