2740w-ig.doc Black 6
AHA-2740W/2742W/2744W
Default Settings
Your host adapter is already configured for the majority
of EISA class computers. Table 3 lists the default set-
tings of your host adapter. Refer to Configuring the Host
Adapter for information on changing any of these
settings.
Table 3. Host Adapter Default Settings
Description
Interrupt Level
Bus Release Time
Data FIFO Threshold
Host Adapter BIOS Base 21
pgAddress
Host Adapter SCSI ID
SCSI Bus Parity Check
SCSI Selection Timeout
SCSI Bus Reset at Power-on
SCSI Bus Termination (Low/High)
Support Removable Disks as Fixed Disk
Extended Translation for Drives > 1
GByte
Support More Than Two Drives
6
Default Setting
IRQ 11
44 BCLKS
100%
D8000h
Device ID 7
Enabled
256 milliseconds
Enabled
On/On
Boot Device Only
Enabled
Disabled