Table of Contents
Advertisement
3.0
Upgrade System Memory
Intel® NUC 11 Pro Kit NUC11TNHi30P, Intel® NUC 11 Pro Kit NUC11TNHi50W and
Intel® NUC 11 Pro Kit NUC11TNHi70Q have two 260-pin DDR4 SO-DIMM memory
slots.
Pre-installed memory
Intel® NUC 11 Pro Kit NUC11TNHi30P
Intel® NUC 11 Pro Kit NUC11TNHi50W
Intel® NUC 11 Pro Kit NUC11TNHi70Q
To upgrade memory, be sure to select memory modules that meet these
requirements:
•
•
•
Find compatible system memory modules at the Intel® Product Compatibility Tool:
•
Intel® NUC 11 Pro Kit NUC11TNHi30P
•
Intel® NUC 11 Pro Kit NUC11TNHi50W
•
Intel® NUC 11 Pro Kit NUC11TNHi70Q
NOTE
3.1
Upgrade to Different Memory
1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer.
3. Turn off the computer and disconnect the power cord.
4. Remove the computer's bottom chassis cover.
5. Remove the pre-installed memory module
a.
b. Holding the module by the edges, lift it away from the socket, and
6. Install the new memory module
a.
b. Insert the bottom edge of the module at a 45 degree angle into
NUC11TNHi30P, NUC11TNHi50W, NUC11TNHi70Q
User Guide – January 2021
1.2V low voltage memory
2133/2400/3200 MHz SO-DIMMs
Non-ECC
If you plan to install only one memory module, install it in the lower
memory socket.
Gently spread the retaining clips at each end of the memory socket, which
causes the module to pop out of the socket (C).
store it in an anti-static package.
Align the small space at the bottom edge of the memory module
with the key in the socket.
Two 4GB memory modules
Two 4GB memory modules
Two 8GB memory modules
8
Advertisement
Table of Contents
