Install And Remove System Memory; Install So-Dimms - Intel NUC 12 Pro Kit User Manual

3.0

Install and Remove System Memory

Intel® NUC 12 Pro Kit NUC12WSK has two 260-pin DDR4 SO-DIMM memory slots
Memory requirements:
•
•
•
Find compatible system memory modules at the Intel® Product Compatibility Tool:
• Intel® NUC 12 Pro Kit NUC12WSKi3
• Intel® NUC 12 Pro Kit NUC12WSKi30Z
• Intel® NUC 12 Pro Kit NUC12WSKi5
• Intel® NUC 12 Pro Kit NUC12WSKi50Z
• Intel® NUC 12 Pro Kit NUC12WSKv5
• Intel® NUC 12 Pro Kit NUC12WSKv50Z
•
Intel® NUC 12 Pro Kit NUC12WSKi7
• Intel® NUC 12 Pro Kit NUC12WSKi70Z
• Intel® NUC 12 Pro Kit NUC12WSKv7
• Intel® NUC 12 Pro Kit NUC12WSKv70Z
3.1

Install SO-DIMMs

If you plan to install just one SO-DIMM, install it in the lower memory
To install the SO-DIMMs, follow these steps:
1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer. Turn off the
computer and disconnect the AC power cord.
3. Align the small notch at the bottom edge of the SO-DIMM with the key in
the socket.
4. Insert the bottom edge of the SO-DIMM into the socket.
NUC12WSK
User Guide – August 2022
1.2V low voltage memory
2133/2400/3200 MHz SO-DIMMs
Non-ECC
8
socket.