Remove The Service Panel - BRAVILOR BONAMAT Sego Technical Manual

2.2 Remove the service panel

► The service panel is delivered without software, you need to download the software yourself on an USB-stick from
our website.
• go to www.bravilor.com and log in with your login name and password
• select Sego machine
• download the software on the USB-stick
• mount the new service panel
• insert the USB-stick with the software in the machine (USB-slot in the door)
• set the time and date
• enter the serial number (see ID−plate − 02000******)
• the software is now loaded from the USB-stick (this may take several minutes)
• the machine will start up with the installation program
• remove the USB-stick
• run the complete installation program
• the machine is now ready for use again
C
D
D
D
D
A
E
Step 1
• open the door
• remove 1 screw from the chrome (coloured) outlet
cover
A
• remove the chrome outlet cover
• remove the wiring cover
• disconnect the wiring
Step 2
• hold the touch screen and remove the 4 screws
the inside of the door
• pull the service panel towards you
B
B
C
D
E
on
3