Remove The Pump Float Tank; Remove The Water Selector - BRAVILOR BONAMAT Sego Technical Manual

2.15 Remove the pump float tank

2.16 Remove the water selector

C
B
F
E
B
A
A
A
C
D
A
D
Step 1
• drain the boiler as in Step 1
Step 2
• disconnect the connector of the float from the wiring
• remove the descaler inlet cap
• disconnect the 3 hoses underneath the float tank
• disconnect the aeration hose
tank
• disconnect the wiring from the pump
Step 3
• push the locking pawl
• move the pump float tank
• remove the pump float tank
► First remove the positioning disc to take out the pump
motor.
Step 1
• drain the boiler as in Step 1
Step 2
• disconnect the wiring from the motor
• disconnect the wiring from the light sensor
• disconnect the hot water supply hose
Step 3
• push the locking pawl
• move the water selector
• disconnect the aeration hose
► Maintenance can be carried out without disconnecting
the hoses from the water selector outlet.
► Consider greasing the notch
rotating disc rotates, with food-grade silicone grease.
of section 2.14.4
on top of the float
B
forward
C
to the left to unlock it
D
of section 2.14.4
A
B
C
forward
D
to the right to unlock it
E
F
in the lid, where the
G
A
G
13