BRAVILOR BONAMAT Sego Technical Manual page 31

!
Ø 10 mm
Step 4
• cut the hose to the required length
• use an elbow coupling to connect the 2 hoses
Step 5
► Make sure that no syphoning can take place, otherwise
the wastewater will not flow
Step 6
• drill out the drip tray drainage spout (from the
back)
Step 7
• place the drip tray
► Ensure that the O-ring is not kinked, as this leads to
leakage.
• go to section 6.1 Step 3 on p.24
27