LEGRAND Server Technology PRO4X Quick Setup Manual page 9

Initial Configuration with CLI
This is a command set example for setting up ETH1 interface with static IP address, gateway, and DNS server.
#config
config:# network bridge enabled false
config:# network ipv4 interface ETH1 enabled true
config:# network ipv4 interface ETH1 configMethod static
config:# network ipv4 interface ETH1 address 192.168.56.80/24
config:# network ipv4 interface ETH1 gateway 192.168.56.128
config:# network dns firstServer 1.1.1.1 secondServer 1.0.0.1
config:# network ethernet Eth1 speed 100Mbps duplexMode full
config:# apply
Initial Configuration with PDView App
1. Install the Raritan PDView app on an iOS or Android mobile device. Android device must support USB "On-The-Go"
(OTG).
• • https://itunes.apple.com/app/raritan-pdview/id780382738
• • https://play.google.com/store/apps/details?id=com.raritan.android.pdview
2. Get an appropriate USB cable for your mobile device.
• • iOS: Use the regular USB cable shipped with your iOS mobile device.
• • Android: Use an USB OTG adapter cable.
3. Connect the mobile device to the appropriate USB port on the product.
• • iOS: USB‑A port.
• • Android: USB‑B port
PRO4X Quick Setup Guide | SPDU_G4_QSG_B1_4.0.40
255-92-0001-00
page
9