Supermicro SuperServer SSG-631E-E1CR16H User Manual page 54

VROC RAID Key Header
A VROC RAID Key header is located at JRK1 on the motherboard. For NVMe RAID support,
install a VROC RAID Key on JRK1 as shown in the illustration below.
Intel VROC Key
Pin Definitions
Pin# Definition
1 Ground
2 3.3V Standby
3 Ground
4 PCH RAID Key
Standby Power
The Standby Power header is located at JSTBY1 on the motherboard. You must have a card
with a Standby Power connector and a cable to use this feature.
Power SMB (I C) Header
2
The Power System Management Bus (I
fan, and system temperatures.
Chapter 4: Motherboard Connections
Standby Power
Pin Definitions
Pin# Definition
1 +5V Standby
2 Ground
3 No Connection
C) connector (JPI2C1) monitors the power supply,
2
Power SMB Header
Pin Definitions
Pin# Definition
1 Clock
2 Data
3 PMBUS_Alert
4 Ground
5 +3.3V
54
VROC Key
VROC Key Header (JRK1)