Supermicro SuperServer SSG-631E-E1CR16H User Manual page 17

Connector
JSTBY1
JTPM1
JUIDB1
LAN1, LAN2
M.2-C1, M.2-C2
P1_NVME0/1 (JNVME1)
P1_NVME2/3 (JNVME2)
P2_NVME4/5 (JNVME3)
S-SGPIO1
USB0/1
USB2
USB3/4 (3.0)
USB5/6 (3.0)
USB7/8 (3.0)
VGA
Description
5V Standby Power Header
Trusted Platform Module/Port 80 Header
Unit Identifier (UID) Switch / BMC Reset Button
Ethernet LAN (RJ45) Port 1 and Port 2 (1G LAN support on X13DEI and 10G LAN
support on X13DEI-T)
PCIe 4.0 x2 NVMe M.2 Slots supported by CPU1 (with support of M-Key 2280 and
22110)
MCIO x8 Connectors supported by CPU1 with four PCIe 5.0 x4 NVMe connections
MCIO x8 Connector supported by CPU2 with two PCIe 5.0 x4 NVMe connections
Serial General Purpose I/O Header (for I-SATA0/1 SuperDOM support)
USB 2.0 Header with support of two USB connections
Internal USB 2.0 Vertical Type-A Connector
Back Panel USB 3.0 Ports (5Gbps, Type-A)
Back Panel USB 3.0 Ports (5Gbps, Type-A)
USB 3.0 Header with support of two USB connections
Rear I/O VGA Port
17
Chapter 1: Introduction