Call Settings - Grandstream Networks WP820 Administration Manual

Server The server list consists of all the domain names or IP addresses of the SIP servers under the selected sever alias. The
List registration priority of addresses in the list is from top to bottom and supports up to 2 SIP domains per alias.

Call Settings

Call Settings
Call Features
Enable Video Call Enables the video call feature.
Default Video Zoom In a video call, the default area which is displayed after press Zoom. The default value is 0 (full screen). Range 0-
Area 9.
Enable the transfer feature. When "unchecked", the phone will block the TRANSFER key on the LCD screen. The
Enable Transfer
default setting is "checked".
Hold Call Before
Completing If you choose "Yes", the transfer call status will be kept as hold status after Attended transfer operation.
Transfer
Enable the conference. When "unchecked", the phone will block the conference function. The default setting is
Enable Conference
"checked".
Configures whether to enable noise shield feature. If enabled, all the background noise will be suppressed except
Enable noise Shield
the sound from speaker.
Enable In-call
If set to "Yes", the device can record during a call; if set to "No", this feature is hidden during a call.
Recording
Enables the call waiting feature. If it is unchecked, the phone will reject the second incoming call during an active
Enable Call Waiting session without user's knowledge. But this missed call record will be saved to remind users. The default setting is
"checked".
Sets the phone to play the call waiting tone if there is another incoming call.
Enable Call Waiting
If it is "Unchecked", the phone will only display the indicator on the LCD screen for another incoming call. The
Tone
default setting is "checked".
If set to "Yes", the phone will automatically turn the screen off when near the proximity sensor during a call.
Enable Proximity
Note : If proximity sensor is disabled, the LCD screen will not turn off during call when handset is held near the
Sensor
ear.
Incoming/Outgoing Call
Determines if the speaker will play the ringtone if the speaker channel is not set as default channel. If set to "Yes",
Always Ring
the phone will force to play the ring speaker in speaker channel even if a headset is connected. The default setting
Speaker
is "checked".
Auto Mute on Entry Configures whether to mute the call on entry automatically.
● If set to "Disable", then do not use auto mute function.
● If set to "Auto Mute on Outgoing Call", then mute automatically when the other party answers the outgoing
● If set to "Auto Mute on Incoming Call", then mute automatically when answers the incoming call.
● If set to "Mute on Incoming & Outgoing Call", then mute automatically when the call gets through.
Table 17: General Settings
call.