Upgrading And Provisioning - Grandstream Networks WP820 Administration Manual

Alarm Tone

UPGRADING AND PROVISIONING

The WP820 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the TFTP/HTTP/HTTPS server and
selecting a download method. Configure a valid URL for TFTP, HTTP or HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com/BETA
fw.mycompany.com
Upgrade and Provisioning Configuration
There are two ways to setup upgrade and provisioning on WP820. They are Keypad Menu and Web GUI.
Configure via keypad Menu
1. In WP820 Settings, select Advanced Settings �� System Upgrade.
2. Navigate to Firmware/Config and configure the firmware upgrade and config settings.
Configure via Web GUI
Open a web browser on PC and enter the IP address for the WP820. Then login with the administrator username and
password. Go to Maintenance �� Upgrade
upgrade server and choose to upgrade via TFTP, HTTP or HTTPS (The default setting is HTTPS). Save and apply the changes,
press Upgrade button, or reboot the phone to initiate firmware upgrade process.
Set the tone of alarm.
Table 40: SAFE/Panic Call
Figure 12: WP820 Upgrade Configuration via Keypad Menu
�� Firmware. In the Upgrade web page, enter the IP address or the FQDN for the