Switching On/Off; Zeroing; Weighing - KERN HCD 60K-2 User Manual

5.3

Switching on/off

Switching on
 Press the ON/OFF button. Once the displays is lit, the scale autotest will be
carried out. Wait until zero is displayed.
Switching off
 Press the ON/OFF button.
5.4

Zeroing

 Hang the initial load.
Press TARE button and wait until zero is displayed. The container weight is saved
in the scale memory.
 Place the weighed material. The net weight will be displayed.
 After you remove the initial load, its weight will be displayed as a negative result.
 To delete the tare weight, remove the load from the crane scale and press TARE.
5.5

Weighing

 Load the crane scale.
 Wait until the stabilization indicator is displayed.
 Read out the weight value.
Overload warning
Avoid any scale overload higher than the stipulated maximum load (Max),
deducting the tare from the existing load. This could damage the scale.
The exceeded maximum load is indicated with "E". Reduce the scale load or
reduce the initial load.
23 HCD-BA-e-2214