5.7.3
Peak value function
This function enables to display the highest loading value (peak value) for one
weighing.
Weighing frequency: 200 ms.
Please note:
The peak value must never overload the scale beyond the quoted
maximum load (!!!Breaking hazard!!).
Switch the scale on, press and hold the HOLD button until the current "Hx" is
displayed (H1–H6).
Press the ON/OFF button several times until the "H6" setting is displayed.
Confirm the setting selection, pressing the HOLD button.
Hang the weighed material.
The peak value will be displayed for a while as indicated by [] above [HOLD] to
the left. The scale is zeroed again automatically and can be used for subsequent
weighing.
HCD-BA-e-2214
26