KERN HCD 60K-2 User Manual page 9

Ambient conditions
 Never operate the crane scale in explosive atmospheres. The standard version is
not explosion-proof.
 The crane scale should always be used in ambient conditions described in this
user manual (in particular in chapter 1 "Technical Specification").
 Do not expose the crane scale to heavy moisture. Any forbidden condensation of
the air moisture on the device may occur when a cold device is placed in a much
hotter environment. In such circumstances, leave the device not connected to the
mains for 2 hours to adapt to the ambient temperature.
 Do not use the crane scale in any corrosive environment.
 Protect the crane scale from high humidity of air, vapours, liquids and dust.
 Avoid extreme temperatures and temperature fluctuations resulting e.g. from
direct solar radiation.
 If there are any electromagnetic fields (caused e.g. by mobile phones or radio
devices), static discharge and unstable power supply, high readout deviations
(erroneous weighing results) may occur. Relocate the unit or remove the source
of interference.
Intended use
The scale you bought is intended for weighing the weighed material. It should be
deemed to be a "non-automatic one", where the material to be weighed should be
manually hung on the crane (overhead crane) hook vertically, carefully and "smoothly".
The weight can be read after it has stabilized.
 The crane scale should always be used to lift and weigh loads which move freely.
 Any non-intended use brings about the injury hazard. It is prohibited e.g. to:
Exceed the permissible rated load of the crane (overhead crane), crane
-
scale or any components used to hoist the load;
Carry people;
-
Pull the loads diagonally;
-
Remove the loads by force, pull them out or drag them.
-
 It is prohibited to modify or alter the crane scale or the crane (overhead crane).
9 HCD-BA-e-2214