5.7.1
"Data Hold" function
Switch the scale on, press and hold the HOLD button until the current "Hx" is
displayed (H1–H6).
Press the ON/OFF several times until the required setting "H1–H4" is displayed.
Confirm the setting selection, pressing the HOLD button.
Hang the weighed material.
The weighing value frozen according to the selected setting (H1–H4) will be
displayed (see chapter 5.7) as indicated by [] displayed above the [HOLD]
symbol to the left.
5.7.2
Animal weighing function
This function is designed for turbulent weighing procedures. The result is the mean
value of 16 weighing values obtained during 3 seconds.
Switch the scale on, press and hold the HOLD button until the current "Hx" is
displayed (H1–H6).
Press the ON/OFF button several times until the "H5" setting is displayed.
Confirm the setting selection, pressing the HOLD button.
Hang the weighed material.
Press the HOLD button and the display will count down from 3 to 1. The mean
value will be displayed as indicated by [] above [HOLD] to the left.
To carry out subsequent weighing, press TARE.
25
HCD-BA-e-2214