2 Safety
Stopping the engine of the vehicle
Stopping and securing the vehicle
2.5
Lifting gear applications
Requirements
2-8
•
Stop the engine only according to the Operator's Manual.
•
Before stopping the engine, lower the work equipment/attachment to
the ground.
•
Unbuckle the seat belt only after stopping the engine.
•
Before leaving the machine, secure it to prevent it from rolling away
(for example with the parking brake, suitable wheel chocks).
•
Remove the starting key and secure the vehicle against unauthorized
operation.
•
Have loads fastened and the operator guided by a qualified person
having specific knowledge of lifting gear applications and the usual
hand signals.
•
The person giving instructions to the operator must stay in visual
contact with the operator when fastening, guiding or removing the load
(maintain visual contact).
•
If this not be possible, ask one more person with the same qualifica-
tions to guide.
•
The operator may not leave his seat as long as the load is raised.
BA E16 en* 1.0 * E16_10_200a.fm