Salicru EQUINOX EQX2 4002-HT User Manual page 91

DOD protection.
9.
DOD
In all modes, protection must be configured, even
a.
though it is already enabled by default. To do so, enable the
SOC on-grid protection switch
USER MANUAL
option (only for General
SOC off-grid protection
and Economy mode) and the
switch DOD
option and set the
Off-grid DOD
parameters, both typically between 90 and
80%. By enabling it in one mode, it is then reproduced in
the other work modes.
On-grid DOD
in the and
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID
91