Table of Contents
Advertisement
Checking After Installation
Disposal Parts Check
1. Following disposal parts are remained after
installation procedure.
[1]
Reversal Guide (Installed to the host
machine)
[2]
Delivery Rear Cover (Upper/Lower)
[3]
Sensor Flags (Upper/Lower)
[4]
Delivery Tray
[5]
Face Cover of the host machine
[6]
Disconnect Lever
Operation Check
1. Turn ON the main power of the host machine.
2. If a message prompting the user to update the
version appears, press [Update] to automatically
update the version of this equipment.
NOTE:
If [Skip] is selected, a message prompting the user to
update the version will appear every time the host
machine is started. In the service mode (Level 2)
shown below, it is possible to set not to display the
message.
• (Lv.2):
COPIER>OPTION>FNC-SW>VER-CHNG
3. Check the paper feed and stapling operation and
others.
1pc.
each
1pc.
each
1pc.
1pc.
1pc.
1pc.
91
6. Installation
Advertisement
Table of Contents
