Canon Inner Finisher-J1 Service Manual page 82

• If the host machine was not able to store the adjustment values
1. Input the value that did P-PRINT output into following item. However, in this case, the counter cannot enter.
• SORTER > ADJUST > STP-2P
• SORTER > ADJUST > PNCH-X
• SORTER > ADJUST > INSTP-F1
• SORTER > ADJUST > INSTP-R1
• SORTER > ADJUST > FR-ST-PS
• SORTER > ADJUST > FR-STP-X
• SORTER > ADJUST > FR-STP-Y
• SORTER > ADJUST > RBLT-PRS
• SORTER > ADJUST > MSTP-2P
• SORTER > ADJUST > INF-ALG1
• SORTER > ADJUST > INF-ALG2
• SORTER > ADJUST > CENT-ALG
• SORTER > OPTION > PUCH-SW
• SORTER > OPTION > FIN-SP1
• SORTER > OPTION > FIN-SP2
• SORTER > OPTION > MSTP-TMG
• SORTER > OPTION > FR-ST-PO
• SORTER > OPTION > MSTP-WT
• SORTER > OPTION > TRY-PSTN
• SORTER > OPTION > TRY-STP
• SORTER > OPTION > FR-ST-SW
• If P-PRINT cannot be output
1. Enter the values of service mode items recorded on the service label of the finisher rear cover.
76
5. Adjustment