Initialization - Canon Inner Finisher-J1 Service Manual

7. After being shifted, the paper stack on the processing tray that has been stacked by the assist guide is delivered to the
delivery tray.
8. After the paper stack has been delivered, the paper retainer holds down the stack in the delivery tray.

Initialization

The finisher performs the following initialization operation depending on the status.
Status
At power ON
When recovering from sleep mode
At the start of a job
At the end of a job
After the cover is closed
*1: Target sensors
Symbol
PS2 Paddle HP Sensor
PS3 Return Belt HP Sensor
PS4 Front Alignment Plate HP Sensor
PS5 Rear Alignment Plate HP Sensor
PS7 Assist HP Sensor
If the target sensors*1 are aware of the home positions, initialization is not performed.
Only before starting a job, the stack tray paper height sensor (PS9) detects the paper height.
Initialization is performed regardless of the sensor status. If at the home position, initialization is
performed by moving the sensor away from the home position.
Parts Name
Assist Guide
Paper Retainer
Operation
Symbol
PS8 Paper Hold HP Sensor
PS9 Stack Tray Paper Height Sensor
PS11 Stapler Shift HP Sensor
PS14 Stack Tray HP Sensor
PS15 Clinch HP Sensor
15
2. Technical Explanation
Parts Name