Operation Instructions; Before First Use - ElectrIQ EAP300PM2.5HC User Manual

OPERATION INSTRUCTIONS

BEFORE FIRST USE:

1) Unpack the appliance and remove the
filter cover from the rear of the unit, by
gently pulling the Air inlet panel back and
then lifting off the unit.
3) Remove the filters from the plastic protective packaging
5) Reinstall the air inlet panel by locating the base of
the panel into the slots, and then pressing around
the panel to clip it into place.
2) Remove the three filters from the rear
of the unit. The pre filter should be
gently freed from the slots holding it in
position, then the HEPA and Carbon
filter will slide out.
4) Load the filters into the rear of the unit
ensuring the tags for removal are facing
outwards. The pre-filter should be gently
manipulated to ensure it is located into the
slots in the unit.
8