Table of Contents
Advertisement
ActiveScale™ OS X100 Rackless Installation Guide
5. Align the back end of the rack mount rail with the back of the rail.
6. Loosely insert four screws to secure the back end of the rail to the rear vertical rail.
7. Follow the same procedure to install the other rack mount rail and rear rail.
8. Verify that the bottom of each rail kit is in the same starting U position. That is, before proceeding,
verify that the rail kits are at even height in the rack.
9. From the back of the rack, on the left side of the rack, run the two SAS cables and a power cable
through the channel on the sides of the rails. (The female ends of the power cords go to the front of the
rack.)
42
Advertisement
Table of Contents
