Table of Contents
Advertisement
The refrigerant generates a sound similar to flowing water.
Sometimes you may hear a sound which is generated by the
injection process of the cooling circuit.
The sides of the appliance may get warm while the
appliance is running.
Distinct noise
When you operate the appliance for the first time or the
temperature falls below a certain level, the appliance will
operate with high power to reach the preset temperature.
Condensed water in / on the appliance
may be generated inside or outside the appliance by high
humidity or very warm ambient temperatures.
Clicking
You will hear the compressor click if it is activated or
deactivated.
Hum
is caused by the compressor while running.
Knocking / snapping
may be generated by sequential expansion and shrinkage
of the components of the cooling system. It is caused by
variation of temperature before and after the compressor
is activated or deactivated.
If the appliance is not used for a longer period of time
(1) Disconnect the appliance from the mains. To disconnect the
appliance from the mains, you must unplug the appliance or
use a cut-off device.
(2) Remove all food stored in the appliance.
(3) Dry the inside of the appliance with a cloth and leave the
door open for a few days.
Advertisement
Table of Contents
