Table of Contents
Advertisement
WARNING!
Never use any mechanical items, knives or other
sharp-edged objects to remove the encrusted ice. RISK
OF ELECTRICAL SHOCK!
(1) Remove the content from the freezing-compartment and
put it into a cooling box.
(2) Switch off the appliance by turning the thermostat to
position 0/AUS/OFF and disconnect it from the mains.
(3) When the encrusted ice melts put some dry cloths into the
freezer-compartment to hold the water back.
(4) Remove the big pieces of ice first. Afterwards remove the
small pieces of ice.
(5) Wipe and dry the appliance and door seals with dry and soft
cloths.
(6) After cleaning leave the door open for some time to
ventilate the appliance.
The cooling compartment is defrosted automatically. The
water runs into a container near the compressor.
If the automatic defrosting does not meet the requirements,
e.g. on days with high ambient temperatures and humidity,
defrost the appliance manually as described above.
Advertisement
Table of Contents
