Stairville LED Flood Panel 150 20 User Manual page 28

Operating
LED Flood Panel 150 20°, LED Flood Panel 150 40°
28
LED Floodlight
Settings for programme 01:
For 'Pr.01' , you can choose from 7 predefined colours. After programme selection, press
[Setup]. Use [Up] and [Down ] to select one of the colour settings '1.––r' to '8.00F' , see the fol‐
lowing table.
Value
'1.––r'
'2.–rg'
'3.––g'
'4.–gb'
'5.––b'
'6.–rb'
'7.rgb'
'8.00F'
Press again [Setup] to set the brightness of the colours and the flash frequency for the strobe
effect. Depending on the mode, the display shows one of the following values: 'rxxx' , 'gxxx' ,
'bxxx' or 'FSxx' . Use [Up] and [Down] to select a value between 'FS00' (slow) and 'FS99' (fast).
Colour setting
Red
Red + green
Green
Green + blue
Blue
Red + blue
Red + green + blue
No function