Table of Contents
Advertisement
5
Starting up
Connections in DMX mode
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the first DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼ W).
LED Flood Panel 150 20°, LED Flood Panel 150 40°
LED Floodlight
Starting up
19
Advertisement
Table of Contents
