Roland S-1 Owner's Manual page 25

This also changes the FILTER KYBD (filter keyboard follow) value in the FILTER section.
1. Hold down the [SHIFT] button and press the [STEP] button.
2. Turn the [TEMPO/VALUE] knob to edit the value (-60–60).
At this time, you can also hold down the [SHIFT] button and press a keyboard pad to make this setting within a range of -12
to +12. (Ver. 1.02)
This is useful when you want to quickly transpose the pitch while a pattern is playing.
Setting the modulation depth (LFO Modulation Depth)
When the OSC or FILTER receive D-MOTION signals or MIDI modulation, they are controlled by the LFO sine wave output
(producing vibrato or growl effects).
This parameter sets the intensity.
1. Hold down the [SHIFT] button and press pad [15] (MENU).
2. Use the [TEMPO/VALUE] knob to select "Nod. d ", and press pad [2] (ENTER).
3. Turn the [TEMPO/VALUE] knob to edit the value (0–255).
Setting the variable range of the pitch bend (Oscillator Bend Sens)
This sets the variable range when you control the oscillation frequency (pitch) of the OSC using D-MOTION or MIDI pitch bend
signals (over a maximum of ±2 octaves).
1. Hold down the [SHIFT] button and press pad [15] (MENU).
2. Use the [TEMPO/VALUE] knob to select "bnd. o ", and press pad [2] (ENTER).
3. Turn the [TEMPO/VALUE] knob to edit the value (0–240).
120: ±1oct, 240: ±2oct
Setting the variable range when using pitch bend to control the cutoff
frequency (Filter Bend Sens)
This sets the variable range when you control the filter's cutoff point using D-MOTION or MIDI pitch bend signals.
1. Hold down the [SHIFT] button and press pad [15] (MENU).
2. Use the [TEMPO/VALUE] knob to select "bnd. F ", and press pad [2] (ENTER).
3. Turn the [TEMPO/VALUE] knob to edit the value (0–255).
Creating sounds
25