Amp Section - Roland S-1 Owner's Manual

Creating sounds

AMP section

This section controls the volume of the sound, letting you change the attack and decay of the sound by controlling the output
signal from the standard envelope generator.
Switching between AMP control sources
Use these steps to select whether to control the AMP by using the envelope generator signal ("Env") or by using the gate signal
("GAtE").
1. Hold down the [SHIFT] button and press the [AMP] pad.
2. Turn the [TEMPO/VALUE] knob to edit the value.
Value Explanation
Controls the AMP by using the gate signal.
GAtE
Controls the AMP by using envelope generator signal.
Env
18