Commissioning; Connection Of The Wired Handheld Readers - Pepperl+Fuchs IDM-Z2-164-D-1D-J2-SU-P-N0 Manual

IDM-Z2-164-D-1D-J2-SU-P-N0, IDM-Z2-264-D-2D-J2-S1-N-N0

Commissioning

5 Commissioning
5.1

Connection of the Wired Handheld Readers

Connection of wired handheld readers
1.
Connect the RJ50 plug on the connection cable CBL-IDMx60* for connecting the handheld
reader to the power module at the bottom of the scanner. Make sure that they are properly
connected.
Figure 5.1
1.
Connect the male M12 connector of the connection cable CBL-IDMx60*. After plugging
together, make sure that the connection is fully secured with the screw cap.
Figure 5.2
17