Commissioning; Connection Of The Wired Handheld Readers - Pepperl+Fuchs IDM-Z2-160-D-1D-J2-SU-N-N0 Manual

IDM-Z2-160-D-1D-J2-SU-N-N0, IDM-Z2-160-D-1D-J2-SU-P-N0, IDM-Z2-260-D-2D-J2-S1-
N-N0
5

Commissioning

5.1

Connection of the Wired Handheld Readers

Connection of wired handheld readers
Connect the RJ50 plug on the connection cable CBL-IDMx60* for connecting the handheld
reader to the power module at the bottom of the scanner. Make sure that they are properly con-
nected.
Figure 5.1
Connect the male M12 connector of the connection cable CBL-IDMx60*. After plugging
together, make sure that the connection is fully secured with the screw cap.
Figure 5.2
19