Setting Screen And Basic Operations; Language Setting - Sanyo VCC-XZ400P Instruction Manual

SETTING SCREEN AND BASIC OPERATIONS

1
Use a Phillips screwdriver to loosen the
four screws at the front of the camera,
and then remove the camera cover.
(See p3 7)
If a camera control unit (VAC-60/70) or a
system controller (DSP-8000) is
connected to the RS-485 connector, you
do not need to remove the camera cover.
The menu screen will be displayed on the
monitor. Refer to the Instruction manual
for the controller for further details.
If the monitor and the menu setting plate
(camera) are apart from each other and
this makes it difficult to carry out
operations, you can temporarily connect
the monitor to the MONITOR and GND
terminals of the setting plate using
alligator clips. However, be sure to
disconnect the alligator clips immediately
after making the settings.
2
Press the SET button for about 3 seconds.
The MAIN MENU screen will appear.
The default screen appears in English. To
change the language to German or French,
refer to "LANGUAGE SETTING" on p13.
3
Use the CURSOR button (jldc) and
SET button to make the settings given
below.
A list of functions appears at the left of
the setting screen, and the setting items
appear at the right.
The flashing cursor position indicates the
currently-selected item.
The return display (y) indicates that a
sub-menu exists. Press the SET button to
proceed to the next screen.
4
To close the MAIN MENU screen, use the
CURSOR button (j or l) to select END
for MENU, and then press the SET button.
To return to the MAIN MENU screen from
a sub-menu, select BACK for MENU and
then press the SET button.
To close a sub-menu, use the CURSOR
button (d or c) to change BACK to END
for MENU and then press the SET button.
MONITOR (Monitor terminal)
CURSOR button
SET button
Simple zoom/focus adjustment
You can use just the CURSOR button to easily
adjust the zoom and focus without using the
setting screen.
Zoom adjustment
Press (d): Wide
Press (c): Tele
Focus adjustment
Press (j): Near
Press (l): Far
MAIN MENU screen
MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU
Sub-menu screen
LANGUAGE
LANGUE
SPRACHE
MENU
11
CURSOR
MONITOR
GND
(Ground
GND
SET
terminal)
SET ‚
OFF
INT
SET ‚
SET ‚
OFF
1 ‚
SET ‚
OFF
END
LANGUAGE
ENGLISH
FRENCH
GERMANY
BACK