Soundoff Signal NEXUS TECHNOLOGY nFORCE LED Lightbar 24 Manual page 2

nFORCE™ LED Lightbar - 24"
Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances. These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these devices to ensure compliance.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/sales-support.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. at 1.800338.7337 (press #4 to skip the automated message).
S U P E R I O R C U S TO M E R R E L AT I O N S H I P S . S M A RT LY D E S I G N E D L I G H T I N G & E L E C T R O N I C S O L U T I O N S .
2.
Questions or comments that do not require immediate attention may be emailed to techservices@soundoffsigal.com.
6 LED Single, Dual & Tri Color Inboard Module
INPUT VOLTAGE RANGE: 10-16Vdc
CURRENT DRAW: 0.5 Amps @ 12.8 Vdc (Flashing)
WATTAGE: 6.4W (Flashing)
9 LED Single Color Inboard Module
INPUT VOLTAGE RANGE: 10-16Vdc
CURRENT DRAW: 0.75 Amps @ 12.8 Vdc (Flashing)
WATTAGE: 9.6W (Flashing)
6 LED Single Color Takedown Module
INPUT VOLTAGE RANGE: 10-16Vdc
CURRENT DRAW: 1 Amps @ 12.8 Vdc (Steady On)
WATTAGE: 12.8 (Steady On)
12 LED Single, Dual & Tri Color Corner Module
INPUT VOLTAGE RANGE: 10-16Vdc
CURRENT DRAW: 1 Amps @ 12.8 Vdc (Flashing)
WATTAGE: 12.8W (Flashing)
12 LED Single, Dual & Tri Color Corner Module w/Alley
INPUT VOLTAGE RANGE: 10-16Vdc
CURRENT DRAW: 1 Amps @ 12.8 Vdc (Flashing)
WATTAGE: 12.8 (Flashing)
18 LED Single Corner Module
INPUT VOLTAGE RANGE: 10-16Vdc
CURRENT DRAW: 1.5 Amps @ 12.8 Vdc (Flashing)
WATTAGE: 19.2W (Flashing)
18 LED Single Corner w/Alley
INPUT VOLTAGE RANGE: 10-16Vdc
WARNING CURRENT DRAW: 1.5 Amps @ 12.8 Vdc (Flashing)
3.5 Amps @ 12.8 Vdc (Steady On)
WARNING WATTAGE: 19.2W (Flashing)
ALLEY CURRENT DRAW: .25 Amps @ 12.8 Vdc (Flashing)
.5 Amps @ 12.8 Vdc (Steady On)
ALLEY WATTAGE: 6.4W (Steady On)
IMPORTANT INFORMATION:
1.0 Amps @ 12.8 Vdc (Steady On)
1.5 Amps @ 12.8 Vdc (Steady On)
2 Amps @ 12.8 Vdc (Steady On)
2.5 Amps @ 12.8 Vdc (Steady On)
3 Amps @ 12.8 Vdc (Steady On)
FLASHING = AVERAGE
STEADY ON (100%) = PEAK
nForce Lightbar - 24inch 09.13