HP LIGHT KIT
EMPR10004-WW - 2x1
EMPR20013-W - 6x1
EMPR10037-WW - 2x1 Dual Stack Kit
TIGHTEN
91.6mm
1/8 TURN PAST
3.61"
FULL COMPRESSION
OF WASHER
66.3mm
2.61"
EMPR10004-WW (2x1) SHOWN
CAUTION
!
Hot heat sink surface,
8
7
DO NOT touch while operating.
WARNING
•HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can cause heat build-up and fire. Follow crimp connector manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle Owner's Manual for deployment zones.
•Installation must only be performed by trained technician. Installer must determine vehicle wiring configuration and proper integration of system.
•Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery terminal or local chassis ground (-) must be sized to supply at least 125%
of max. current and properly fused at power source.
•Do NOT use system to disconnect headlights, brake lights or other safety equipment.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
•Install protective grommets when routing wire through firewall or metal.
•Unit may become hot to touch during normal operation.
1.800.338.7337 / www.soundoffsignal.com
1
MAX. TORQUE: 12 IN-LBS.
TIGHTEN
1/8 TURN PAST
FULL COMPRESSION
OF WASHER
42.9mm
1.69"
EMPR10004-WW (2x1) SHOWN
91.6
3.61
66.3
2.61
TIGHTEN 1/8 TURN PAST
6
5
FULL COMPRESSION OF
WASHER (FOR BOTH
LEFT AND RIGHT SIDES)
Installers and users must comply with all applicable federal, state and local laws
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal
product, visit our website at www.soundoffsignal.com/tech-services/returns/.
If you have questions regarding this product, contact Technical Services, Monday - Friday,
Questions or comments that do not require immediate attention may be emailed to tech-
MAX. TORQUE: 12 IN-LBS.
39.2mm
1.54"
24.2mm
0.95"
SHOWN WITH DUAL STACKED
MOUNT APPLICATION
NOTE: MAKE SURE TO INSTALL LIGHT WITH
GORE PATCH FACING DOWN.
39.2
1.54
42.9
1.69
DO NOT USE POWER TOOLS TO
WARNING
!
4
This product contains high intensity LED devices.
To prevent eye damage, DO NOT stare into the
light beam at close range.
NOTICE:
91.6
regarding use and installation of warning devices.
3.61
Improper use or installation may void warranty coverage.
66.3
2.61
8 a.m. to 5 p.m. ET at 1.800.338.7337 (press #4).
services@soundoffsignal.com.
E N H A N C I N G S A F E T Y T H R O U G H I N N O VAT I O N
MAX
EMPR10004-WW INTRODUCTION:
TORQUE: 12 IN-LBS.
QTY
2
2
2
1
1
2.6
3.6
1
BRACKET KIT CONTAINS
QTY
1
1
1
PMPR1HW001 - HPS Bracket Hardware
BRACKET KIT CONTAINS
QTY
MATERIAL:
1
24.2
DESCRIPTION:
0.95
2
10-32, 3/8" PAN HD TORX, SS Screw
TIGHTEN
DRAWING NO:
High-power-assembly
2
8-32, 3/8" FLNG BTN HD, SS Screw
3
2
1
2
1
2
FOR DUAL STACKED MOUNT
QTY
2
8-32, 1 1/2" FLNG BTN HD, SS Screw
2
Protected by U.S. Patent 10,703,260
https://soundoffsignal.com/legal/patent-notification
E
CONTAINS
COMPONENT
mpower
ORV 2x1 Light
®
D
PMPR1BK001 - Bracket Kit
PMPR1HN001 - Harness Kit
Registration Card
Installation Instruction sheet
Product Warning Card
C
PMPR1BK001*
COMPONENT
Cradle Bracket
1.5
U Bracket
1.7
2.5
Kit
B
PMPR1HW001*
COMPONENT
5/16-18 Nylon Lock Nut
A
REVISION:
2 OF 2
1
SHEET
5/16"-18 X 1" Long Carriage Bolt
#10 Flat Washer, 7/16 OD SS
5/16 USS Flat Washer SS 3/4" OD
#10 Split Lock Washer, SS
PMPR1HW002**
HARDWARE KIT
CONTAINS
COMPONENT
SPACER, 3/8 OD X 1/2" LONG
*included in purchase
39.2
**sold separately
1.54
42.9
1.69
and Patents Pending
HIGH POWER SPOT 0321
Need help?
Do you have a question about the mPower EMPR10004-WW and is the answer not in the manual?
Questions and answers