CAME Wi-Fi PLX V Operating And Installation Manual page 28

DOOR STATUS function
Use this function to view the current door status (open/closed)
via the LED on the button.
The system must be correctly set up.
See [LED STATUS KEY]
The function is active during communication with the
outside.
Page 28 - Manual - FA01792-EN - 10/2022 © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
OPEN GATE and GATE STATUS function
The open gate function is used to activate the open/close gate
function and view the gate status (open/closed) via the LED on
the button.
The function must be activated during system
programming.
Press and hold the button for more than 3 seconds to send
an open or close gate command.
The DOOR STATUS function is active by default. The
OPEN GATE/GATE STATUS function must be correctly
confi gured. The two functions cannot both be active at the
same time.
AUTOMATIC DOOR RELEASE function
> 3s
This function allows you to automatically open the entrance
when you ring the bell from the entry panel. Communication is
not activated and the call ends automatically. It is recommended
for professional practices.
The function is available by default. It can be removed
during system programming.
Press and hold the
activate or deactivate the function.
The LED switches on to indicate that the function
is active.
> 5s
button for more than 5 seconds to