Page 2
Jotron Tron AIS TR-8000 consists of two separate units interconnected by Ethernet. The Transponder Unit is the main unit, handling the basic AIS functionality, including sensors and RF functions, while the Display Unit is used for setup and display of the AIS data.
Page 3
The TR-8000 is delivered with SW version according to table below which is filled in by Jotron, our Distributor, Dealer or Installation company. When SW update is done according to instructions in Jotron TB 01-2012 (Technical Bulletin), an additional line of information will be filled in to reflect the latest change.
Page 5
Quick Guide Connect : Antennas (Ch. 8.1 – 8.2) Display cable between Display and Transponder ( Ch. 8.3.2) Power to both units (Ch. 8.3.1.3 & 8.3.2) Sensors (Ch. 8.3.1.4) External display (Ch.8.3.1.5) Pilot Port [Option] (Ch. 8.3.1.6, 8.3.2 & 10.2.1.3) Alarm (Ch.
Page 6
If Jotron make a decision of repairing a defective product, a written description of the claim and a Jotron RMA number, should follow the unit when returning it back to Jotron’s factory. Please be noted that un-protective electronics board MUST be packed in antistatic bag, before returning to Jotron’s factory.
Page 7
Place Date Signature Please fill in with capital letters This form must be sent to Jotron AS, beacon@jotron.com or Fax.: + 47 33 12 67 80 (Att: Service department) in order to have a valid 24 months product warranty TR-8000 Quick Reference Guide...
Need help?
Do you have a question about the Tron AIS TR-8000 and is the answer not in the manual?
Questions and answers