Jotron Tron AIS TR-8000 MkII consists of two separate units interconnected by Ethernet. The Transponder Unit is the main unit, handling the basic AIS functionality, including sensors and RF functions, while the Display Unit is used for setup and display of the AIS data.
Software Revisions The TR-8000 is delivered with software version according to table below which is filled in by Jotron, our Distributor, Dealer, or Installation company. When software update is done according to instructions in Jotron TB 01-2012 (Technical Bulletin), an additional line of information shall be filled in to reflect the latest change. There will be no need for retraining after SW upgrade is performed.
Quick Guide Reference to the main manual: “Tron AIS TR-8000 MkII - Operator and installation manual” 1. Connect : • Antennas (Ch. 8.1.3) • Display cable between Display and Transponder ( Ch. 8.3) • Power to both units (Ch. 8.3, 8.3.2 & 8.3.3.2) •...
Improper service or maintenance may destroy the functionality and/or performance of this product. Jotron does not accept any responsibility for the dismantling or reassembling of any Jotron product that occurs externally from a Jotron authorized facility and/or is handled by someone other than an authorized, training, and certified person.
10 Tron AIS TR-8000 MkII Installasjon – Registration Form Vessel name IMO Number Flag State MMSI Number Owner / Company Radio Call Sign On-Board Contact Telephone Mobile: Name Number(s) GSM: Superintendents Telephone Office: Number(s) Name Mobile: Type of Vessel Gross Registered Tonnage L.O.A.
11 Document Revision Log Document revision log Date Reason for Issue Author 26.08.2021 New MkII manual in new company profile ØB jotron.com Doc. No.: 103836 Rev. A Page 8...
Page 12
NORWAY / HEADQUARTERS CHINA Jotron AS Jotron USA, Inc Norway Jotron AS Beijing Ringdalskogen 8 6300 Rothway Street, Suite C Representative Office (ATC business) 3270 Larvik, Norway Houston, TX 77040, USA No. 1204 room, building D Tel: +47 33 13 97 00...